Shipping Only £4.50 Per Order, including Scottish Highlands & Islands & Northern Ireland
Land Rover Defender 1983-2016 OEM Coil Spring Isolator / 10mm Trim Packer
Code: SK32
£5.99
( Excl VAT VAT £4.99)
Triple 4 original equipment coil spring isolator and / or 10mm trim packer to fit Land Rover Defender 90 110 and 130 models 1983-2016. 

Triple 4 spring isolators are a very versatile part and have a number of uses. It's primary purpose is as a spring vibration isolator. The isolator is made from steel and has a tough rubber coating.

Triple 4 isolators fit on the top of the coil springs and prevent metal to metal contact between the top of the coil spring and the chassis spring seat. This takes out any harshness and dramatically improves ride comfort.

As well as this improved ride comfort, Triple 4 isolators also add 10mm to the ride height of your vehicle. You could also use one at the top and one at the bottom of each coil spring to give you a 20mm lift. Using the isolators in this way is ideal if you want to keep the original OEM coil springs without having to resort to a lift spring which usually have too high a spring rate to suit the weight of your vehicle and have you bouncing around all over the place. 

Triple 4 isolators can also be used individually or in pairs as a trim packer to adjust and level up the vehicles ride height. Examples of this are if the vehicle is leaning to the left or right, or you want to level up say a 110, that sits higher at the back as standard. 

Limitations!

Triple 4 Isolators are designed to be used with standard length shock absorbers. They are not designed to be used with long travel suspension or any form or spring dislocation / spring relocation cones.

Fits:-

  • Defender 90 - Front & Rear
  • Defender 110 - Front Only
  • Defender 130 - Front Only

What's in the kit?​

  • 1x Triple 4 OEM Spring Isolator
Related part numbers ANR2938

This kit fits Defender, Ninety, One-Ten, 90, 110, 130, 2.5 12J N/A Diesel, 2.5 19J TD, 200TDi, 300TDi, TD5, 2.4 TDCi Puma, 2.2 TDCi Puma, 2.25 Petrol, 2.5 Petrol and V8 models.
Triple 4 original equipment coil spring isolator and / or 10mm trim packer to fit Land Rover Defender 90 110 and 130 models 1983-2016. 

Triple 4 spring isolators are a very versatile part and have a number of uses. It's primary purpose is as a spring vibration isolator. The isolator is made from steel and has a tough rubber coating.

Triple 4 isolators fit on the top of the coil springs and prevent metal to metal contact between the top of the coil spring and the chassis spring seat. This takes out any harshness and dramatically improves ride comfort.

As well as this improved ride comfort, Triple 4 isolators also add 10mm to the ride height of your vehicle. You could also use one at the top and one at the bottom of each coil spring to give you a 20mm lift. Using the isolators in this way is ideal if you want to keep the original OEM coil springs without having to resort to a lift spring which usually have too high a spring rate to suit the weight of your vehicle and have you bouncing around all over the place. 

Triple 4 isolators can also be used individually or in pairs as a trim packer to adjust and level up the vehicles ride height. Examples of this are if the vehicle is leaning to the left or right, or you want to level up say a 110, that sits higher at the back as standard. 

Limitations!

Triple 4 Isolators are designed to be used with standard length shock absorbers. They are not designed to be used with long travel suspension or any form or spring dislocation / spring relocation cones.

Fits:-

  • Defender 90 - Front & Rear
  • Defender 110 - Front Only
  • Defender 130 - Front Only

What's in the kit?​

  • 1x Triple 4 OEM Spring Isolator
Related part numbers ANR2938

This kit fits Defender, Ninety, One-Ten, 90, 110, 130, 2.5 12J N/A Diesel, 2.5 19J TD, 200TDi, 300TDi, TD5, 2.4 TDCi Puma, 2.2 TDCi Puma, 2.25 Petrol, 2.5 Petrol and V8 models.
Customer Reviews (0)