Shipping Only £4.50 Per Order, including Scottish Highlands & Islands & Northern Ireland
Land Rover Defender 2009-2016 OEM Rear A-Frame Arm Bush & Bolt Kit
Land Rover Defender 2009-2016 OEM Rear A-Frame Arm Bush & Bolt Kit
Code: CK17
£46.25
( Excl VAT VAT £38.54)
Triple 4 original equipment rear A-Frame Arm to Chassis Bush & Bolt Kit to fit all Land Rover Defender 90 110 and 130 models from 2009 to 2016. (from chassis number 9A768937 to the end of production). 

What make Triple 4 kits stand out?

Triple 4 Engineering suspension bushes are made for us to original equipment specification and are superior to anything else on the market. Triple 4 metalastic rubber bushes are tough and durable, whilst still allowing the suspension to flex. They offer a firm, yet supple ride. They're not fancy, they don't look glitzy, they just do the job superbly. 

Metalastic rubber bushes are the go to bush for any serious 4WD owner. Whatever the application, from road car, greenlaner, weekend toy, overlander, even competition vehicles. A  proper set of original equipment spec metalastic bushes take some beating.

Most people like to follow the trend of fitting expensive and not so expensive polyurethane bushes. We have tried all the major brands of polyurethane bushes, experienced them first hand, on every type of terrain, and in our opinion, they just don't make the grade. The 4 main issues been ride quality, splitting, tearing and premature wear. Yes, polyurethane bushes do have a place in some applications. But for us, on a Defender / Disco 1 / Range Rover Classic chassis, rubber wins every time. 

This kit also comes with a complete bolt kit for each bush in the kit. It uses conventional hex head bolts as used on the earlier Land Rover models. We offer these as a more cost effective alternative to the OEM flange bolts we offer in our other kit.

All Triple 4 bolt kits are made to OEM standards and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.

What's in the kit?

  • 2x Triple 4 OEM Rear A-Frame Arm Bushes.
  • 2x Triple 4 OEM Grade 10.9 High Tensile Bolts - Arm to Chassis Bush.
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts.
Related part numbers RYG501550 / ANR4164

This kit fits all Defender 90, 110, 130 2.4 & 2.2 TDCi Puma from 2009 to 2016.
Triple 4 original equipment rear A-Frame Arm to Chassis Bush & Bolt Kit to fit all Land Rover Defender 90 110 and 130 models from 2009 to 2016. (from chassis number 9A768937 to the end of production). 

What make Triple 4 kits stand out?

Triple 4 Engineering suspension bushes are made for us to original equipment specification and are superior to anything else on the market. Triple 4 metalastic rubber bushes are tough and durable, whilst still allowing the suspension to flex. They offer a firm, yet supple ride. They're not fancy, they don't look glitzy, they just do the job superbly. 

Metalastic rubber bushes are the go to bush for any serious 4WD owner. Whatever the application, from road car, greenlaner, weekend toy, overlander, even competition vehicles. A  proper set of original equipment spec metalastic bushes take some beating.

Most people like to follow the trend of fitting expensive and not so expensive polyurethane bushes. We have tried all the major brands of polyurethane bushes, experienced them first hand, on every type of terrain, and in our opinion, they just don't make the grade. The 4 main issues been ride quality, splitting, tearing and premature wear. Yes, polyurethane bushes do have a place in some applications. But for us, on a Defender / Disco 1 / Range Rover Classic chassis, rubber wins every time. 

This kit also comes with a complete bolt kit for each bush in the kit. It uses conventional hex head bolts as used on the earlier Land Rover models. We offer these as a more cost effective alternative to the OEM flange bolts we offer in our other kit.

All Triple 4 bolt kits are made to OEM standards and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.

What's in the kit?

  • 2x Triple 4 OEM Rear A-Frame Arm Bushes.
  • 2x Triple 4 OEM Grade 10.9 High Tensile Bolts - Arm to Chassis Bush.
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts.
Related part numbers RYG501550 / ANR4164

This kit fits all Defender 90, 110, 130 2.4 & 2.2 TDCi Puma from 2009 to 2016.
Customer Reviews (0)