Shipping Only £4.50 Per Order, including Scottish Highlands & Islands & Northern Ireland
Land Rover Defender 4-Cyl Petrol Overland Wading Kit Alloy Manifold - Yellow
Code: WK453-Y
£99.99
( Excl VAT VAT £83.33)
Triple 4 Engineering Overland Spec Wading Kit (yellow hose) to fit all Land Rover Defender 90, 110 & 130 2.25 & 2.5 4-Cyl Petrol models. 
 
Triple 4 Overland Spec Wading kits are, in our opinion, the best wading kits on the market today. The specification and quality of Triple 4 wading kits are way ahead of any other wading kit out there, be it those from suppliers in the UK, Europe, the USA and even the home of tough 4x4 products, Australia,

What makes Triple 4 Wading Kits the Best?

Triple 4 Overland Spec Wading Kits are designed with ultimate reliability in mind. These kits use the same high quality components of our Ultimate Spec Wading Kits, but use 6mm hose. They are designed for all forms of off road use where your kit has to perform without fail.  A great deal of off-road experience and attention to detail has gone into the design of each Triple 4 Overland Spec Wading Kit.
 
Triple 4 Overland Spec Wading Kits use superior ultra-flexible, highly abrasion resistant 6mm breather hose. We supply you with 14 metres of hose in each kit, which is more than most other kits on the market. This allows you to route all the breathers exactly where you want them without having to worry about running out of hose.

Triple 4 Overland Spec Wading Kits use either a technopolymer manifold or an alloy manifold to connect each individual breather hose into a single outlet. This Overland Spec wading kit uses our top of the range alloy manifold.

Using an alloy manifold allows you to adapt and add to the breather system on the vehicle. It also gives you the flexibility of using different hose sizes by simply changing a union and adding breathers for things such as the fuel tank, winch motor, sealed distributor caps etc.

The Triple 4 gearbox, transfer box & axle breather unions are nickel plated brass, which are strong and are tough enough to take the odd knock, which is inevitable when off road. The internal hose locking mechanisms are brass and stainless steel, allowing for easy disconnecting and reconnecting for maintenance. (Cheaper wading kits use flimsy plastic unions which don't take knocks all that well and these cheap unions also use mild steel internal locking mechanisms which rust, compromising the integrity of the hose seal (i.e. they let water in) and won't release the hose when the time comes for any maintenance).
 
The breather unions we use in Triple 4 Overland Spec Wading Kits are swivel type unions. This allows you to position the outlet of the breather hose just where you want it. Cheaper kits use fixed unions, where the hose outlet ends up pointing where the union happens to tighten up, not exactly where you want it. 
 
A Triple 4 “Y" connector is used in the kit to connect the Gearbox and Transfer Box breathers together. This forms one outlet to connect to the manifold. The Triple 4 "Y" connectors are made from a superior grade technopolymer shell, again with brass and stainless-steel internals as used in our swivel unions.

We included with the wading kit a hose release tool to make hose removal from all our connectors & unions simple and easy.

To finish the Triple 4 Overland Spec Wading Kit, a 2 metre length of alloy maluform tube is supplied in the kit. This is to allow you to vent the wading kit up to the top of the raised air intake / snorkel, or up the back of the cab for tray back / competition vehicles. Alloy maluform tube is a rubber lined alloy tube. It retains its shape once bent, so it provides a neat way to finish the wading kit installation. Cheaper wading kits just use nylon hose for this, nylon hose isn't UV stable and quickly discolours and cracks when exposed to the sun for long periods. Triple 4 maluform tube is UV stable and won’t discolour or crack.
 
The maluform tube will connect directly into the manifold, however, we also supply you with a 8mm to 8mm connector to allow you to connect a length of Triple 4 8mm breather hose (supplied in the kit) between the manifold and the alloy maluform tube. Nylon been much more flexible in routing the hose from the manifold under the bonnet to the raised air intake on the wing.
 
The alloy maluform tube also come with 4 stainless steel rubber lined "P" clips and stainless steel self-tappers which you can use to secure the hose to the windscreen frame, or alternatively, and our preferred method, is to cable tie it to the raised air intake or external roll cage.

The kits come with everything needed to fit them, i.e. cable ties and all fixings, all supplied in generous quantities. In all our years of experience, with many other brands of wading kit, you never seem to be supplied with enough cable ties and fixings to do the job.
 
If you need to connect anything else to the manifold, or need any advice, just get in touch. We are old fashioned and like to use the phone, so this is the quickest and easiest way to contact us.

What's in this kit?

• 14 Metres of Triple 4 6mm Ultra Flexible Abrasion Resistant Nylon Hose (for the main breather hoses).
• 2 Metres of Triple 4 Alloy Maluform Tube (black) to run up the side of your snorkel / Raised Air Intake.
• 4x Rubber Lined Stainless Steel "P" Clips & Stainless Steel Self Tappers (for the maluform tube).
• 1x Triple 4 Connector (to connect the alloy maluform tube to the manifold via a length of 8mm Nylon Hose- use only if required).
• 1x 6 Way Alloy Manifold (4x Unions, with 2 Spares Blanked Off).
• 1x 3-Way Technopolymer "Y" Connector (allows you to connect the 2 breathers from the gearbox and transfer box together into one hose to bring it up to the manifold).
• 2x Triple 4 90° Elbow Swivel Unions for the Gearbox & Transfer Box.
• 2x Triple 4 90° Elbow Swivel Unions for the Axles.
• 1x Triple 4 Hose Release Tool for the Breather Unions.
• 15x Large Cable Ties.
• 30x Small Cable Ties.
Triple 4 Engineering Overland Spec Wading Kit (yellow hose) to fit all Land Rover Defender 90, 110 & 130 2.25 & 2.5 4-Cyl Petrol models. 
 
Triple 4 Overland Spec Wading kits are, in our opinion, the best wading kits on the market today. The specification and quality of Triple 4 wading kits are way ahead of any other wading kit out there, be it those from suppliers in the UK, Europe, the USA and even the home of tough 4x4 products, Australia,

What makes Triple 4 Wading Kits the Best?

Triple 4 Overland Spec Wading Kits are designed with ultimate reliability in mind. These kits use the same high quality components of our Ultimate Spec Wading Kits, but use 6mm hose. They are designed for all forms of off road use where your kit has to perform without fail.  A great deal of off-road experience and attention to detail has gone into the design of each Triple 4 Overland Spec Wading Kit.
 
Triple 4 Overland Spec Wading Kits use superior ultra-flexible, highly abrasion resistant 6mm breather hose. We supply you with 14 metres of hose in each kit, which is more than most other kits on the market. This allows you to route all the breathers exactly where you want them without having to worry about running out of hose.

Triple 4 Overland Spec Wading Kits use either a technopolymer manifold or an alloy manifold to connect each individual breather hose into a single outlet. This Overland Spec wading kit uses our top of the range alloy manifold.

Using an alloy manifold allows you to adapt and add to the breather system on the vehicle. It also gives you the flexibility of using different hose sizes by simply changing a union and adding breathers for things such as the fuel tank, winch motor, sealed distributor caps etc.

The Triple 4 gearbox, transfer box & axle breather unions are nickel plated brass, which are strong and are tough enough to take the odd knock, which is inevitable when off road. The internal hose locking mechanisms are brass and stainless steel, allowing for easy disconnecting and reconnecting for maintenance. (Cheaper wading kits use flimsy plastic unions which don't take knocks all that well and these cheap unions also use mild steel internal locking mechanisms which rust, compromising the integrity of the hose seal (i.e. they let water in) and won't release the hose when the time comes for any maintenance).
 
The breather unions we use in Triple 4 Overland Spec Wading Kits are swivel type unions. This allows you to position the outlet of the breather hose just where you want it. Cheaper kits use fixed unions, where the hose outlet ends up pointing where the union happens to tighten up, not exactly where you want it. 
 
A Triple 4 “Y" connector is used in the kit to connect the Gearbox and Transfer Box breathers together. This forms one outlet to connect to the manifold. The Triple 4 "Y" connectors are made from a superior grade technopolymer shell, again with brass and stainless-steel internals as used in our swivel unions.

We included with the wading kit a hose release tool to make hose removal from all our connectors & unions simple and easy.

To finish the Triple 4 Overland Spec Wading Kit, a 2 metre length of alloy maluform tube is supplied in the kit. This is to allow you to vent the wading kit up to the top of the raised air intake / snorkel, or up the back of the cab for tray back / competition vehicles. Alloy maluform tube is a rubber lined alloy tube. It retains its shape once bent, so it provides a neat way to finish the wading kit installation. Cheaper wading kits just use nylon hose for this, nylon hose isn't UV stable and quickly discolours and cracks when exposed to the sun for long periods. Triple 4 maluform tube is UV stable and won’t discolour or crack.
 
The maluform tube will connect directly into the manifold, however, we also supply you with a 8mm to 8mm connector to allow you to connect a length of Triple 4 8mm breather hose (supplied in the kit) between the manifold and the alloy maluform tube. Nylon been much more flexible in routing the hose from the manifold under the bonnet to the raised air intake on the wing.
 
The alloy maluform tube also come with 4 stainless steel rubber lined "P" clips and stainless steel self-tappers which you can use to secure the hose to the windscreen frame, or alternatively, and our preferred method, is to cable tie it to the raised air intake or external roll cage.

The kits come with everything needed to fit them, i.e. cable ties and all fixings, all supplied in generous quantities. In all our years of experience, with many other brands of wading kit, you never seem to be supplied with enough cable ties and fixings to do the job.
 
If you need to connect anything else to the manifold, or need any advice, just get in touch. We are old fashioned and like to use the phone, so this is the quickest and easiest way to contact us.

What's in this kit?

• 14 Metres of Triple 4 6mm Ultra Flexible Abrasion Resistant Nylon Hose (for the main breather hoses).
• 2 Metres of Triple 4 Alloy Maluform Tube (black) to run up the side of your snorkel / Raised Air Intake.
• 4x Rubber Lined Stainless Steel "P" Clips & Stainless Steel Self Tappers (for the maluform tube).
• 1x Triple 4 Connector (to connect the alloy maluform tube to the manifold via a length of 8mm Nylon Hose- use only if required).
• 1x 6 Way Alloy Manifold (4x Unions, with 2 Spares Blanked Off).
• 1x 3-Way Technopolymer "Y" Connector (allows you to connect the 2 breathers from the gearbox and transfer box together into one hose to bring it up to the manifold).
• 2x Triple 4 90° Elbow Swivel Unions for the Gearbox & Transfer Box.
• 2x Triple 4 90° Elbow Swivel Unions for the Axles.
• 1x Triple 4 Hose Release Tool for the Breather Unions.
• 15x Large Cable Ties.
• 30x Small Cable Ties.
Customer Reviews (0)