Shipping Only £4.50 Per Order, including Scottish Highlands & Islands & Northern Ireland
Range Rover Classic 1970-1985 OEM Rear Radius Arm Bush & Bolt Kit
Range Rover Classic 1970-1985 OEM Rear Radius Arm Bush & Bolt Kit
Code: CK19
£36.25
( Excl VAT VAT £30.21)
Triple 4 original equipment rear radius arm bush & bolt kit to fit all Range Rover Classic models from 1970 to 1985. i.e. models fitted with the original type narrow diameter radius arms (approx 16mm / 5/8" diameter where it fits into the chassis bush).

What makes Triple 4 kits stand out?

Triple 4 Engineering suspension bushes are made for us to original equipment specification and we think they are superior to anything else on the market. Triple 4 metalastic rubber bushes are tough and durable, whilst still allowing the suspension to flex. They offer a firm, yet supple ride. They're not fancy, they don't look glitzy, they just do the job superbly. 

Metalastic rubber bushes are the go to bush for any serious 4WD owner. Whatever the application, from road car, greenlaner, weekend toy, overlander, even competition vehicles. A proper set of original equipment spec metalastic bushes take some beating.

Most people like to follow the trend of fitting expensive and not so expensive polyurethane bushes. We have tried all the major brands of polyurethane bushes, experienced them first hand, on every type of terrain, and in our opinion, they just don't make the grade. The 4 main issues been ride quality, splitting, tearing and premature wear. Yes, polyurethane bushes do have a place in some applications. But for us, on a Defender / Disco 1 / Range Rover Classic chassis, rubber wins every time.  

This kit also comes with a complete bolt kit for each bush in the kit. All Triple 4 bolt kits are made to OEM standards and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.

What's in the kit?

  • 2x Triple 4 OEM Rear Radius Arm to Axle Bushes
  • 2x Triple 4 OEM Rear Radius Arm to Chassis Bushes
  • 2x Triple 4 OEM Imperial High Tensile Bolts (Axle End)
  • 2x Triple 4 OEM Imperial Nyloc Nuts (Axle End)
  • 2x Triple 4 OEM Imperial Nyloc Nuts (Chassis End)
  • 6x Triple 4 OEM Chassis Bush Imperial Bolts, Washers & Nyloc Nuts (Chassis Bush Plate)
Related part numbers 572180 | SH606091L | NTC1772 | RYG501550 | BH610321L | NY120041L | NY610041L | NY606041L |

 
Triple 4 original equipment rear radius arm bush & bolt kit to fit all Range Rover Classic models from 1970 to 1985. i.e. models fitted with the original type narrow diameter radius arms (approx 16mm / 5/8" diameter where it fits into the chassis bush).

What makes Triple 4 kits stand out?

Triple 4 Engineering suspension bushes are made for us to original equipment specification and we think they are superior to anything else on the market. Triple 4 metalastic rubber bushes are tough and durable, whilst still allowing the suspension to flex. They offer a firm, yet supple ride. They're not fancy, they don't look glitzy, they just do the job superbly. 

Metalastic rubber bushes are the go to bush for any serious 4WD owner. Whatever the application, from road car, greenlaner, weekend toy, overlander, even competition vehicles. A proper set of original equipment spec metalastic bushes take some beating.

Most people like to follow the trend of fitting expensive and not so expensive polyurethane bushes. We have tried all the major brands of polyurethane bushes, experienced them first hand, on every type of terrain, and in our opinion, they just don't make the grade. The 4 main issues been ride quality, splitting, tearing and premature wear. Yes, polyurethane bushes do have a place in some applications. But for us, on a Defender / Disco 1 / Range Rover Classic chassis, rubber wins every time.  

This kit also comes with a complete bolt kit for each bush in the kit. All Triple 4 bolt kits are made to OEM standards and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.

What's in the kit?

  • 2x Triple 4 OEM Rear Radius Arm to Axle Bushes
  • 2x Triple 4 OEM Rear Radius Arm to Chassis Bushes
  • 2x Triple 4 OEM Imperial High Tensile Bolts (Axle End)
  • 2x Triple 4 OEM Imperial Nyloc Nuts (Axle End)
  • 2x Triple 4 OEM Imperial Nyloc Nuts (Chassis End)
  • 6x Triple 4 OEM Chassis Bush Imperial Bolts, Washers & Nyloc Nuts (Chassis Bush Plate)
Related part numbers 572180 | SH606091L | NTC1772 | RYG501550 | BH610321L | NY120041L | NY610041L | NY606041L |

 
Customer Reviews (0)