Triple 4 original equipment complete suspension bush & flange bolt kit to fit all Land Rover Defender 90 110 and 130 models from 1994 to 2002 (from chassis number LA940456 up to chassis number 2A626645).
This is the fast road version of this kit and is recommended for fast road applications and also for heavily loaded vehicles due to the extra steel insert in the front radius arm bushes.
This kit uses more modern flange bolts and nuts for the front and rear radius arms. These are identical to those used on the last of the Defender models.
What makes Triple 4 kits stand out?
Triple 4 Engineering suspension bushes are made for us to original equipment specification and we believe they are superior to anything else on the market. Triple 4 metalastic rubber bushes are tough and durable, whilst still allowing the suspension to flex. They offer a firm, yet supple ride. They're not fancy, they don't look glitzy, they just do the job superbly.
Metalastic rubber bushes are the go to bush for any serious 4WD owner. Whatever the application, from road car, greenlaner, weekend toy, overlander, even competition vehicles. A proper set of original equipment spec metalastic bushes take some beating.
Most people like to follow the trend of fitting expensive and not so expensive Polyurethane Bushes. We have tried all the major brands of polyurethane bushes, experienced them first hand, on every type of terrain, and in our opinion, they just don't make the grade. The 4 main issues been ride quality, splitting, tearing and premature wear. Yes, polyurethane bushes do have a place in some applications. But for us, on a Defender / Disco 1 / Range Rover Classic chassis, rubber wins every time.
This is the fast road version of this kit and differs from our off road kit. The front radius arm to axle bushes have an extra steel insert sandwiched in the bush and the radius arm to chassis bushes have a smooth inside wall. This reduces the flexibility in the bush resulting in a stiffer front end, giving a firmer ride and less body roll at the expense of a slight decrease in axle articulation.
This kit also comes with a complete bolt kit for each bush in the kit. All Triple 4 bolt kits are made to OEM standards and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.
What's in the kit?
Front Radius Arms
- 4x Triple 4 OEM Front Radius Arm to Axle Bushes
- 4x Triple 4 OEM Front Radius Arm to Chassis Bushes
- 4x Triple 4 OEM Grade 10.9 High Tensile Flange Bolts (Axle End)
- 4x Triple 4 OEM Grade 10 Nyloc Flange Nuts (Axle End)
- 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
- 4x Triple 4 OEM Chassis Bush Retaining Washers
Rear Radius Arms
- 2x Triple 4 OEM Rear Radius Arm to Axle Bushes
- 2x Triple 4 OEM Rear Radius Arm to Chassis Bushes
- 2x Triple 4 OEM Grade 10.9 High Tensile Bolts (Axle End)
- 2x Triple 4 OEM Grade 10 Nyloc Nuts (Axle End)
- 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
- 2x Triple 4 OEM Washers (Chassis End)
- 6x Triple 4 OEM Chassis Bush Plate, Grade 10.9 Bolts, Washers & Nyloc Nuts
Panhard Rod
- 2x Triple 4 OEM Panhard Rod Bushes
- 2x Triple 4 OEM Grade 10.9 Panhard Rod Bolts
- 2x Triple 4 OEM Grade 10 Nyloc Nuts
Rear A-Frame
- 2x Triple 4 OEM Rear A-Frame Arm to Chassis Bushes
- 2x Triple 4 OEM Imperial Bolts - Arm to Chassis Bush
- 2x Triple 4 OEM Imperial Nyloc Nuts
Related part numbers ANR3410 / ANR6971 / NTC1772 / NTC1773 / NTC6781 / NTC9027 / STC618 / NTC6860 / NTC4514
This kit fits all 300TDi models and TD5 models up to 2002.
