Triple 4 original equipment complete suspension bush & bolt kit to fit all Land Rover Defender 90 110 and 130 models from 2009 to 2016 (all models from chassis number 9A68937 to the end of production).
This is the fast road version of this kit and is recommended for fast road applications and also for heavily loaded vehicles due to the extra steel insert in the front radius arm bushes.
This kit comes with High Tensile OEM Grade 10.9 Bolts and Nyloc Nuts. These are convenional hex head bolts, which we offer as a more cost effective alternative to our OEM flange bolt kits. Flange bolts were fitted to these vehicles as standard from the factory.
What makes Triple 4 kits stand out?
Triple 4 Engineering suspension bushes are made for us to original equipment specification and we believe they are superior to anything else on the market. Triple 4 metalastic rubber bushes are tough and durable, whilst still allowing the suspension to flex. They offer a firm, yet supple ride. They're not fancy, they don't look glitzy, they just do the job superbly.
Metalastic rubber bushes are the go to bush for any serious 4WD owner. Whatever the application, from road car, greenlaner, weekend toy, overlander, even competition vehicles. A proper set of original equipment spec metalastic bushes take some beating.
Most people like to follow the trend of fitting expensive and not so expensive polyurethane bushes. We have tried all the major brands of polyurethane bushes, experienced them first hand, on every type of terrain, and in our opinion, they just don't make the grade. The 4 main issues been ride quality, splitting, tearing and premature wear. Yes, polyurethane bushes do have a place in some applications. But for us, on a Defender / Disco 1 / Range Rover Classic chassis, rubber wins every time.
This is the fast road version of this kit and differs from our off road kit. The front radius arm to axle bushes have an extra steel insert sandwiched in the bush and the radius arm to chassis bushes have a smooth inside wall. This reduces the flexibility in the bush resulting in a stiffer front end, giving a firmer ride and less body roll at the expense of a slight decrease in axle articulation.
This kit also comes with a complete bolt kit for each bush in the kit. All Triple 4 bolt kits are made to OEM standards and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.
What's in the kit?
Front Radius Arms
- 4x Triple 4 OEM Front Radius Arm to Axle Bushes
- 4x Triple 4 OEM Front Radius Arm to Chassis Bushes
- 4x Triple 4 OEM Grade 10.9 High Tensile Flange Bolts (Axle End)
- 4x Triple 4 OEM Grade 10 Nyloc Flange Nuts (Axle End)
- 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
- 4x Triple 4 OEM Chassis Bush Retaining Washers
Rear Radius Arms
- 2x Triple 4 OEM Rear Radius Arm to Axle Bushes
- 2x Triple 4 OEM Rear Radius Arm to Chassis Bushes
- 2x Triple 4 OEM Grade 10.9 High Tensile Bolts (Axle End)
- 2x Triple 4 OEM Grade 10 Nyloc Nuts (Axle End)
- 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
- 2x Triple 4 OEM Washers (Chassis End)
- 6x Triple 4 OEM Chassis Bush Plate Grade 10.9 Bolts, Washers & Nyloc Nuts
Panhard Rod
- 2x Triple 4 OEM Panhard Rod Bushes
- 2x Triple 4 OEM Grade 10.9 High Tensile Bolts
- 2x Triple 4 OEM Grade 10 Nyloc Nuts
Rear A-Frame
- 2x Triple 4 OEM Rear A-Frame Arm to Chassis Bushes
- 2x Triple 4 OEM Grade 10.9 High Tensile Bolts
- 2x Triple 4 OEM Grade 10 Nyloc Nuts
Related part numbers RBX101340 / ANR6971 / NTC1772 / ANR4164 / NTC6781 / NTC9027 / STC618 / NTC6860 / NTC4514
This kit fits Defender 2.4 TDCi Puma models from 2009 onwards and all 2.2 TDCi Puma models.
