Triple 4 original equipment complete suspension bush & bolt kit to fit all Land Rover Defender 90 110 and 130 models from 1983 to 1993. (all models up to chassis number KA930455) i.e. all models up to and including 200TDi.
The radius arm to axle bushes are to suit the 38mm wide front radius arms which were originally fitted to these vehicles.
What makes Triple 4 kits stand out?
Triple 4 Engineering suspension bushes are made for us to original equipment specification. We believe they are superior to anything else on the market. Triple 4 metalastic rubber bushes are tough and durable, whilst still allowing the suspension to flex. They offer a firm, yet supple ride. They're not fancy, they don't look glitzy, they just do the job superbly.
Metalastic rubber bushes are the go to bush for any serious 4WD owner. Whatever the application, from road car, greenlaner, weekend toy, overlander, even competition vehicles. A proper set of original equipment spec metalastic bushes take some beating.
Most people like to follow the trend of fitting expensive and not so expensive polyurethane bushes. We have tried all the major brands of polyurethane bushes, experienced them first hand, on every type of terrain, and in our opinion, they just don't make the grade. The 4 main issues been ride quality, splitting, tearing and premature wear. Yes, polyurethane bushes do have a place in some applications. But for us, on a Defender / Disco 1 / Range Rover Classic chassis, rubber wins every time.
This kit also comes with a complete bolt kit for each bush in the kit. All Triple 4 bolt kits are made to OEM standards and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.
What's in the kit?
Front Radius Arms
- 4x Triple 4 OEM Front Radius Arm to Axle Bushes
- 4x Triple 4 OEM Front Radius Arm to Chassis Bushes
- 4x Triple 4 OEM Imperial High Tensile Bolts (Axle End)
- 4x Triple 4 OEM Imperial Nyloc Nuts (Axle End)
- 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
- 4x Triple 4 OEM Chassis Bush Retaining Washers
Rear Radius Arms
- 2x Triple 4 OEM Rear Radius Arm to Axle Bushes
- 2x Triple 4 OEM Rear Radius Arm to Chassis Bushes
- 2x Triple 4 OEM Imperial High Tensile Bolts (Axle End)
- 2x Triple 4 OEM Imperial Nyloc Nuts (Axle End)
- 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End)
- 2x Triple 4 OEM Washers (Chassis End)
- 6x Triple 4 OEM Chassis Bush Plate Grade 10.9 Bolts, Washers & Nyloc Nuts
Panhard Rod
- 2x Triple 4 OEM Panhard Rod Bushes
- 2x Triple 4 OEM Grade 10.9 Panhard Rod Bolts
- 2x Triple 4 OEM Grade 10 Nyloc Nuts
Rear A-Frame
- 2x Triple 4 OEM Rear A-Frame Arm to Chassis Bushes
- 2x Triple 4 OEM Imperial Bolts - Arm to Chassis Bush
- 2x Triple 4 OEM Imperial Nyloc Nuts
Related part numbers ANR3410 / NRC4514 / NTC1772 / NTC1773 / NTC7307 / NTC9027 / STC618.
This kit fits all 2.5 12J N/A Diesel, all 2.5 19J Turbo Diesel, all 200TDi, all 2.25 Petrol, all 2.5 Petrol and V8 models (V8 models up to 1993 only)
