Genuine Timken "Deluxe" rear wheel bearing kit to fit Land Rover Discovery 1 models from 1994 to 1998. i.e. all 300TDi models and all V8 models with serpentine type drive belts.
This Triple 4 "Deluxe" wheel bearing kit comes complete with all the hardware required to replace one wheel bearing.
Triple 4 wheel bearing kits are the best on the market. All our wheel bearing kits use original equipment parts throughout. Timken Bearings, Corteco Oil Seals, even the lock nut washer is original equipment. Unlike a lot of sellers, who call their kits original equipment and supply you with Timken bearings which is the only bit of the kit which is original equipment. The rest of the kit been made up of cheap gaskets and rock hard cheap plastic seals.
Each Triple 4 wheel bearing kit comes with twin hub lock nuts and lock washer.
Each kit also comes with the all important outer wheel bearing shielding washer. This is a thick washer which is fitted after the outer wheel bearing, before the hub nut (s). This washer is the same diameter as the hub bore and helps shield the bearing from contamination when operating in extreme environments.
The drive member gaskets in Triple 4 kits have not escaped the Triple 4 treatment either. We weren't happy with the OEM gaskets, these are wafer thin and split when you tighten the drive member bolts up. So we had them made to our own design from superior grade gasket material. To clamp up the drive member, each kit comes with 5x OEM correct grade 10.9 drive member bolts (not grade 8.8 like in a lot of other kits).
What's in this kit?
- 2x Timken Original Equipment Wheel Bearings (inner & outer)
- 1x Corteco Original Equipment Hub Seal
- 1x Triple 4 Engineering (better than OEM) Drive Member Gasket
- 5x Triple 4 OEM Drive Member Bolts (Grade 10.9)
- 2x Triple 4 OEM Hub Nuts & Tab Washer (Earlier Type)
- 1x Triple 4 OEM Bearing Shielding Washer
Related part numbers 549473 / 571751 / BX110095M / FRC8700 / FTC4785 / FTC5414 / RTC3429 / STC4382 / FTC3179 / FTC5241
