Shipping Only £4.50 Per Order, including Scottish Highlands & Islands & Northern Ireland
Range Rover Classic Rear Radius Arm Flange Bolt Kit
Range Rover Classic Rear Radius Arm Flange Bolt Kit
Code: SK12-FL
£17.75
( Excl VAT VAT £14.79)
Triple 4 rear radius arm flange bolt kit to fit all Range Rover Classic models from 1986 onwards.

This kit uses superior Grade 10.9 High Tensile flange bolts with all metal locking nuts for the axle bolts and grade 10 nyloc nuts for the chassis end. Metal locking flange nuts are far better at withstanding harsh vibration and heat than nyloc nuts found in other kits.The 6 chassis bush bolts & nuts in this kit are the flange type. These feature integral washers and the hex heads are smaller than standard, making it so much easier to get a socket on in the tight confines of the chassis bracket.

All Triple 4 bolt kits are made to OEM standards and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.

What's in the kit?​

  • 2x Triple 4 OEM Grade 10.9 High Tensile Flange Bolts (Axle End).
  • 2x Triple 4 OEM Grade 10 All Metal Locking Flange Nuts (Axle End).
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End).
  • 2x Triple 4 OEM Washers (Chassis End).
  • 6x Triple 4 OEM Chassis Bush Plate Grade 10.9 Flange Bolts & Nyloc Flange Nuts.
Related part numbers NTC9027, STC618, NTC1772.
Triple 4 rear radius arm flange bolt kit to fit all Range Rover Classic models from 1986 onwards.

This kit uses superior Grade 10.9 High Tensile flange bolts with all metal locking nuts for the axle bolts and grade 10 nyloc nuts for the chassis end. Metal locking flange nuts are far better at withstanding harsh vibration and heat than nyloc nuts found in other kits.The 6 chassis bush bolts & nuts in this kit are the flange type. These feature integral washers and the hex heads are smaller than standard, making it so much easier to get a socket on in the tight confines of the chassis bracket.

All Triple 4 bolt kits are made to OEM standards and come with the correct grade of high tensile bolts and nuts for each application. All our bolt kits meet the relevant IS0, DIN and BS standards.

What's in the kit?​

  • 2x Triple 4 OEM Grade 10.9 High Tensile Flange Bolts (Axle End).
  • 2x Triple 4 OEM Grade 10 All Metal Locking Flange Nuts (Axle End).
  • 2x Triple 4 OEM Grade 10 Nyloc Nuts (Chassis End).
  • 2x Triple 4 OEM Washers (Chassis End).
  • 6x Triple 4 OEM Chassis Bush Plate Grade 10.9 Flange Bolts & Nyloc Flange Nuts.
Related part numbers NTC9027, STC618, NTC1772.
Customer Reviews (0)